Size of Micelles Determined by Static Fluorescence Quenching

We developed a new method to measure the average aggregation number of large rod-like micelles using static fluorescence self-quenching of a solubilized fluorophore. The method is based on the increase of self-quenching of micelle-solubilized pyrene through excimer formation. We consider the effect of random distribution of pyrene in micelles and the micellar size distribution. The measured average aggregation <n> _M is based on a new M-weighted raging similar to our exponential-weighted averaging in the transient decay method. We apply this method to study the effect of a large concentration of salt on the average aggregation behavior of sodium dodecyl sulfate (SDS) and cetyle tetraammonium bromide (CTAB). The sizes increase with increasing ionic concentrations. For SDS, we used the thermodynamic model developed by Missel et al. to calculate < n > _M which we compare with experimental results.     

Millimeter and submillimeter detection using Ga1?xAlxAs/GaAs heterostructures

We have shown that a Ga_1–xAl_xAs/GaAs heterostructure can be used as a sensitive tunable detector of mm-wave/sub-mm-wave radiation. The mechanism for detection requires the application of a magnetic field varying from approximately 0.2T at 94GHz (3.2mm wavelength) to 6.2T at 2500GHz (119m wavelength). The responsivity and N.E.P. at 3.2mm have been roughly estimated at 200V/W and 5×10^–11W/Hz respectively. The speed of such a detector could be several orders of magnitude greater than comparable InSb detectors.     

On the stereochemistry of the Horner—Emmons reaction between 3-functionally substituted 2-methyl-2-propenylphosphonates and aliphatic aldehydes

The reaction of diethyl 3-ethoxycarbonyl-2-methyl-2-propenylphosphonate (1a) with 3-methylbutanal (2) in heterogeneous MOH (solid)-benzene systems in the presence of 5–10 mol.% of benzyltriethylammonium chloride (BTEAC) gives the reaction product (3) with a higher, for M=K, or lower, for M=Li, ratio of 2E,4E and 2Z,4E-stereoisomers than that observed in the absence of BTEAC. Tetrabutylammonium bromide (TBAB) as a catalyst of the reaction1a + 2 3 in the system KOH (solid)-wet benzene leads to a higher [2E,4E-3][2Z,4E-3] ratio than BTEAC; this ratio grows from 4456 without TBAB to 8020 at 100 mol.% of TBAB. In the latter case the stereochemical outcome of the reaction is similar to that obtained when tetrabutylammonium hydroxide in dry benzene is used as the deprotonating agent. The corresponding diisopropyl phosphonate (1b) and 3,7-dimethyloctanal (4a) interact in the system KOH (solid)-wet benzene-TBAB to give hydroprene (5) containing 88 % of the 2E,4E-isomer (5a) while in the case of 1 equiv. of [(n-Bu₄)N]OH in dry benzene the content of5a is 92 %. Diisopropyl 3-isopropoxycarbonyl-2-methyl-2-propenylphosphonate (1c) and 7-methoxy-3,7-dimethyloctanal (4b) under either of these conditions afford methoprene (6) containing 93 % of the 2E,4E-isomer.Part 6, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1098, June, 1993.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Isoperichoric focusing field-flow fractionation and thin layer isoperichoric focusing based on coupling of gradient generated by primary field with secondary field action: general principles and performances

The primary field forces can generate spatially oriented gradient of the effective property of a continuum or pseudo-continuum fluid (carrier liquid). When this gradient is coupled with the action of a secondary field of identical or different nature the isoperichoric focused zones of the dispersed species can appear. Consequently, they can be separated according to differences responding to the property gradient of the carrier liquid. This concept can be applied under static (non-flow) conditions in thin layer focusing as well as under dynamic conditions with the elution due to the carrier liquid flow in focusing field-flow fractionation. The gradient established by the action of the primary field and the concentration distribution of the isoperichoric focused zone formed by the coupled effect of the gradient and of the primary or secondary field are described theoretically. The rigorous relationship describing the shape of the focused zone is compared with the approximate solutions. The performances of the proposed principle were evaluated by model calculations. Potential experimental configurations considering the implementation of the static and dynamic conditions are discussed. The generalized isoperichoric focusing theory can be applied to describe the particular processes operating in analytical and preparative focusing separations of the particles of various, but especially of biological origin.     

Photolytic oxidation of As species for determination of total As (including the ‘hidden’ As fraction) in coastal seawater by hydride generation-atomic fluorescence spectrometry

Ultraviolet irradiation (photolysis) in alkaline medium was applied for pretreatment of seawater samples so as to accurately determine total As by continuous-flow hydride generation-atomic fluorescence spectrometry. This sample pretreatment is meant to convert non-reducible As forms into inorganic As, which easily forms arsine. The optimised parameters were the treatment time and the pH of the medium. The behaviour of four hydride-reactive As species [As(III), As(V), MMA, DMA], and AsB, i.e. a typical non-hydride-reactive As species, when subjected to UV irradiation was studied. UV irradiation at pH 1 lead to conversion of all species into As(V) with the exception of AsB and DMA. Conversions of DMA and AsB into As(V) at pH 11 in less than 30 min were observed under UV irradiation. The limit of detection of As (measured as As(V)) by hydride generation-atomic fluorescence spectrometry was 0.1 μg/L and the repeatability of the oxidation procedure was about 10%. The method was applied to determination of total and directly reducible As at 11 sampling points of the Galician Coast (Atlantic Ocean, Spain). Total As concentrations were in the range 1.4-4.8 μg/L. A significant As fraction, between 20 and 44%, depending on the sampling point, corresponded to non-reducible As which was converted by UV irradiation into hydride-reactive As. This fraction should represent the sum of DMA, which yields a low sensitivity in the continuous flow-AFS system, and the hidden As fraction.     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Zur Struktur zweier Arsen- und Antimontricarboxylate

Zusammenfassung Arsen-tris(2,2-dimethylpropionat) (1) kristallisiert monoklin in der Raumgruppe P2₁/n mita=926.2,b=2158.6,c=983.7 pm, =94.92° undZ=4. As hat gegenüber O die Koordinationszahl 3+3. Antimontripropionat (2) kristallisiert monoklin in der Raumgruppe P2₁/c mita=930.2,b=863.0,c=1575.2 pm, =90.27 undZ=4. Die Moleküle sind intermolekular zu Ketten verknüpft, wodurch Sb die Koordinationszahl 3+3 (+3) erreicht.

---

Structure of arsen(III) and antimony(III) carboxylates

Summary Arsen-tris(2,2-dimethylpropionate) (1) crystallizes monoclinic in the space group P2₁/n witha=926.2,b=2158.6,c=983.7 pm, =94.92°, andZ=4. As has a coordination number of 3+3. Antimony tripropionate (2) crystallizes monoclinic in the space group P2₁/c witha=930.2,b=863.0,c=1575.2 pm, =90.27, andZ=4. The molecules are bridged to chains; therefore, Sb reaches the coordination number 3+3 (+3).

     

Micelle formation of ethoxylated nonyl-phenols in aqueous solutions

The micelle formation of nonyl-phenols with various numbers of ethoxy groups (n _EO=10–40) was investigated in aqueous solutions and the study was focussed on the effect of temperature (293–323 K), the chain length and the inorganic electrolyte (NaCl) on the critical micelle concentration (c.m.c).The c.m.c. was determined by surface tension and interfacial tension measurements in a water/n-octane system. On the basis of the actual c.m.c. and its temperature dependence the thermodynamic functions of micelle formation (H° _m,S°_m,G°_m) were also calculated. The latter study comprised the determination of the thermodynamic function for unity ethoxy groups ((Y° _m)) as a function ofn _EO.According to the experimental results the micellar solutions are the more stable, the smaller the number of ethoxy groups in the tenside molecule and the higher the temperature as well as the electrolyte content of the system.     

Chemical modification of silica surface by immobilization of functional groups for extractive concentration of metal ions

Increased utilization of mechanically stable synthetic matrices particularly silica gel as a solid support and its surface modification either by impregnation of organic ligands directly or covalent grafting through spacer unit for extractive concentration of trace elements are highlighted in the present article. Experimental evidences for existence of surface silanol and its chemical nature have explored the idea of silica surface modification. Recent methods of development in functionalized silica synthesis by attachment of various ligands or organic reagents to the silica surface and techniques of characterization of the modified surface have been reported. Analytical applications of various modified silica surfaces, in particular, adsorption of trace elements taking separation and preconcentration into account from complex synthetic mixture as well as natural water is presented.